UNBOX AND SET UP - YOUR GUIDE TO NEW SHOWER UNIT INSTALLATION

Unbox And Set Up - Your Guide To New Shower Unit Installation

Unbox And Set Up - Your Guide To New Shower Unit Installation

Blog Article

Get Estimate



How do you actually feel about How to Install a Shower Enclosure ?


How to Install a One-Piece Shower Unit
An effective shower setup requires mindful preparation as well as a great deal of work. Most of the times, you will certainly require to do three types of tasks: framing walls, mounting the plumbing, and also finishing wall surfaces.

Prep work


First of all, you need to pick the sort of shower that you desire to mount. It is important to determine whether the picked shower can handling specific systems as well as can control a risk-free level of water through the boiler. Many shower units nowadays are developed to be flexible to different water stress (such as saved warm water and also cool keys).
It is additionally crucial to take into consideration the water stress as well as the planning of the piping and also drain for the shower

Different Kinds Of Shower Units


  • Push-on Mixer: The hose pipe and spray parts of the push-on mixer shower unit can be attached to the bathroom tap as per your need, as well as the water temperature can be adjusted using the faucets. Push-on mixers are cheap as well as incredibly simple to mount. Nonetheless, although the pipe connection is simple, it is conveniently displaced. Furthermore, it is bothersome to change the temperature.

  • Bath/Shower Mixer: The tube and also spray of this kind of shower are combined with a bathroom mixer faucet, and the temperature can be readjusted with the bath faucets. It is an extremely inexpensive alternative and no added plumbing is included. However, the bath/shower mixers additionally experience troublesome temperature control choices.

  • Handbook Mixer: The hose and also spray of a hands-on mixer shower system are a part of the wall surface system and the cold and hot water supplies are attached to a single shutoff The temperature and stress of the water are controlled via either one or a selection of knobs (in extra expensive showers). Although temperature level control is a lot easier in hands-on mixer kinds, they are extra pricey than the previously discussed mixers. They additionally need additional plumbing of hot and cold water pipes.

  • Thermostatic Mixer: The pipe and also spray of this shower type belong of the wall surface unit as well as the cold and hot water supplies are connected to a solitary shutoff here as well. It is full with an integrated stabiliser to self-adjust the water temperature as well as to stop it from becoming as well warm. Among the biggest advantages of a thermostatic mixer shower kind consists of convenient temperature control. Nevertheless, it is one of the most pricey of the different mixer choices.

  • Power Shower: A power shower is a solitary device having a powerful electric pump that is capable of modifying both the water stress and also temperature. This kind of shower can be fitted if there is water from a cold water tank as well as a warm water cyndrical tube. A power shower makes the adjustment of both pressure and temperature simple. On the other hand, it disagrees for water warmed straight by the shower or where the water is provided by a mix boiler under mains pressure.

  • Electric Shower: An electric shower is plumbed into a mains cold water supply as well as it heats up the water electrically. It is very important to keep in mind that for this shower kind to be mounted, the keys stress needs to be at least 0.7 kg/sq centimeters (10lb/sq in). The unit enables the temperature level and stress to be readjusted using a handle. Versions with temperature level stabilisers are much better as they continue to be untouched by various other faucets in other places in use within the household. A major downside of electrical showers is that the control handle just permits the choice of heats at much less pressure, or lower temperatures at a greater pressure. This is problematic in the winter when the spray is often weak and also the keys water is cooler. Nevertheless, this issue is dealt with in some designs which are available with a winter/summer setup.


  • Technique


    Depending upon the type of shower you wish to set up, the shower head need to either be suited order to prevent its contact with the water in the bathroom below or the base tray, or it must have a check valve.
    Before starting, it is a good idea to note the settings of the shower head and also control, as well as to prepare the pipe-work included. In addition, the water drainage system to get rid of the waste water will need to be planned. Both positions of the cable television path as well as the shower switch will likewise need to be thought about if an instant or electric shower unit is being installed.
    Use the instruction guide provided with the shower unit to fit the shower control.Before fitting the pipes that will provide the water to the shower system, it is necessary to remove the water. In order to secure the pipes, they should be given a waterproof covering and additionally fitted with separating shutoffs. The pipelines can then be buried into the wall surface and also glued over to neaten the general look.
    Fit the base tray, shower head, and fittings.
    Attach the major shower control to the pipelines that will be supplying the water (This might need a female screw thread adapter).
    Reconnect the supply of water and examination the pipelines for any type of leaks, as some may require tightening up.
    If you are setting up an electrical shower, bear in mind to turn off the electrical energy supply before making any kind of electric connections. Once these links have been made (there should be guidance within the user's manual), the power supply can be switched over back on.

    Changing Water Pressure to Suit Your Shower


    The cold water storage tank can be lifted to a greater elevation (occasionally as low as 150mm (6inches)) by fitting a solid wood assistance below it - possibly made up of struts and also blockboards. If you select this option, the main and also circulation pipes will certainly additionally have to be raised to fulfill the new elevation of the tank.
    Additionally, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever type is picked, it needs to be linked into the power supply in order to run.

    Piping as well as Drainage


    It is best to make use of 15mm diameter supply pipes, and also make the runs to the shower as short and also straight as possible so regarding preserve maximum stress as well as minimise warmth loss. Furthermore, by reducing using elbows for pipeline corners, you can reduce the resistance in the circulation of the water system. You can achieve this by flexing the pipes rather.

    Many Common Errors


  • Breaking or overlooking local code constraints.

  • Utilizing pipelines that are as well small.

  • Connecting copper to galvanized without using a brass or dielectric suitable between both.

  • Not using tape or pipe compound at threaded joints.

  • Uneven your fixtures when mounting them.

  • Not installing an air space filling for components.

  • Reducing supply stub outs as well brief to install the shutoff valves onto after the ended up wall remains in place.

  • Not appropriately aligning tubing right into fittings or quit valves. (Forcing the nut onto the compression ring at an angle when the tubes goes to an angle will create a leakage.).

  • When transforming the water back on in your home, constantly run the outside pipe shutoff or flush your bathrooms to hemorrhage dirt and also air from the lines. This debris can trigger troubles in your sink faucets as well as various other plumbing trim.



  • Most Popular Shower Enclosure Options to Upgrade Your Bathroom


    Frameless Shower Enclosures


    Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.



    Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.


    In-line Shower Options


    Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.



    You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.


    Semi-Frameless Shower Enclosures


    The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.



    Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.



    You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.


    Glass Block Shower Enclosure


    If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.



    You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.



    Final Thoughts



    Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

    https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/


    How to Install a Freestanding Shower Unit

    We are very focused on How to Install a Freestand and I hope you liked our piece. Those who enjoyed reading our blog posting kindly remember to share it. Many thanks for taking the time to read it.




    Book An Estimate Now


    Report this page